Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A variation of several other ideas combined. I used some old “Trackipede” parts I had laying around to connect this vise to my “Helping Hands” workstation. That is what the grooves on the bottom are used for in my case.
You will need 1-8x22 Bearing (608) 2-M3x6mm screws and 1-M3x8mm screw to assemble.
49
Curtidas
234
Downloads
1
Impressões
Categoria
Electronics
Tags
soldering
solderingaid
vise
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (11)
Soldering Vise - Slide Clamp.3mf
31.8 KB
Soldering Vise - Screw Cap.3mf
23.3 KB
Soldering Vise - Base.3mf
134 KB
Soldering Vise - Screw.3mf
1.6 MB
Soldering Vise - Screw-2.3mf
1.6 MB
Soldering Vise - Bearing Retainer.3mf
705.6 KB
Soldering Vise - Slide Clamp.stl
117.3 KB
Soldering Vise - Screw Cap.stl
84.7 KB
Soldering Vise - Base.stl
386 KB
Soldering Vise - Bearing Retainer.stl
2.2 MB
Soldering Vise - Screw.stl
4.1 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta