Adjustable feet, VanessaE style :-)

I went looking for something I could use, found a design on Thingiverse, then started hacking on it... I've cut the total length down considerably, compared to the original parts, added four screw holes to mount the female/receiver half to whatever the feet are being used with (in this case, the platform that forms the base of my printer), and made the head of the male/screw piece round instead of square, with a scalloped perimeter.

Unfortunately, the reference to the original source got lost when I moved my projects here to PP.org, and I can no longer find the original.

Print instructions

Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Household Supplies Print Settings

Printer Brand: Prusa

Printer: Prusa Clone

Rafts: No

Supports: No

Resolution: 0.2 mm

Infill: 30-50%

Notes:

The threads are kinda tight depending on the plastic used and the printer's calibration. You may want to oil them, and/or screw/unscrew them at least once to free them up. Expect to need gloves or a rag to give you enough grip to do that.