Holds 12 spools of thread that are 33mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 33.5mm to easily hold a 33mm spool.

Went with a more minimalist approach. Extruded circles out from baseplate instead of cutting circles into a thicker baseplate. Removed brim.

Version 2 is more minimalist, print separate from the legs, print 4 legs, glue legs to corners. This design is meant to stay in the drawer/location, if you need it stronger, glue on more legs, in the middle.

Enjoying adding on to the wonderful creation of Zack Freedman's Gridfinity

Gridfinity Tips!

• No brims or support required!
• Use any filament with an 0.6mm or smaller nozzle.
• Wider bins can curl, so maximize your bed adhesion if you're going big!
• All storage blocks are compatible with all baseplates!
• Most storage blocks are stackable!
• You can add 6x2mm magnets to the corners! They won't magnetize the contents.
• You can also use M3 screws in the corner