Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Sturdy adjustable support with double screw-thread inside. Useful for support your shelf, furniture etc.
Range is 22cm to approx. 36cm.
Carrying capacity is at least 50kg when printed from PETG with 20% infill.
Recommend set random seam distribution, first assemble can be little bit harder without that.
There are two versions
- counter clockwise thread
- clockwise thread (classic one)
Recommended settings:
PETG
Layer height: 0.2mm
Random seam
Supports: no
30
Curtidas
166
Downloads
4
Impressões
Categoria
Other Ideas
Tags
support
adjustable
nastavitelny
podpera
adjustablesupport
nastavitelnapodpera
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (4)
adjustable_support_clockwise_outer.stl
9.8 MB
adjustable_support_clockwise_inner.stl
9.3 MB
adjustable_support_counter_clockwise_inner.stl
9.1 MB
adjustable_support_counter_clockwise_outer.stl
9.8 MB