Poker tournament trophy that supports 44 winners.

I encourage you to edit the large plaque to display your own name and logo.

Assembled dimensions: 7.75" x 10" x 19"

Print in parts and superglue together:

• trophy_base_bottom (multicolor: black and gold)
• trophy_base_middle (black)
• trophy_base_top (multicolor: black and gold)
• trophy_base_pillars (black)
• trophy_bird (gold)
• trophy_plaque (x1) (multicolor: black and gold)
• trophy_plaque_empty (x44) (red)
• trophy_poker_chip (optional: I decided to use a real poker chip)

Total print time is about 45 hours on my Bambu P1S.

Filaments:

• Overture Black PLA
• Overture Gold Silk PLA
• Bambu Labs Red PLA

General print settings:

• 0.2mm layer height
• 0.4mm nozzle
• Arachne wall generator (especially useful for text and the logo)

Notes about printing the bird:

The bird is the only model that requires supports.  I had a print fail because the nozzle knocked it over.  To print successfully I did the following:

• Put a fresh layer of glue on the build plate.
• Added a 15mm brim.
• Changed infill to gyroid.
• Painted in more supports for the belly.