Holds 25 spools of thread that are 30mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Reuploaded version 1 to better fit the spools, 30.5mm holes for 30mm spools.

Version 2 is more minimalist, uses less plastic to print. Extruded circles out from baseplate instead of cutting circles into a thicker baseplate. Removed brim.

Version 3 is even more minimalist, print separate from the legs, print 4 legs, glue together. This design is meant to stay in the drawer, if you need it stronger, glue on more legs, in the middle.

Enjoying adding on to the wonderful creation of Zack Freedman's Gridfinity

Gridfinity Tips!

• No brims or support required!
• Use any filament with an 0.6mm or smaller nozzle.
• Wider bins can curl, so maximize your bed adhesion if you're going big!
• All storage blocks are compatible with all baseplates!
• Most storage blocks are stackable!
• You can add 6x2mm magnets to the corners! They won't magnetize the contents.
• You can also use M3 screws in the corner