Complete list of parts and 3d models used to create your own Hydroponic Tower:

 [https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts](https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts)  

Today i'm putting together a 3d printed modular hydroponic tower garden. It's an exciting print, and just in time to get your backyard garden ready for summer. Below you will find all of the parts used so you can get started building your own. 

The lid uses 18 M3x6 bolts and nuts to fasten everything together. 

General Hydroponics Maxigro and Maxibloom Fertilizer: [https://geni.us/BI1hrD](https://geni.us/BI1hrD)  

VIVOSUN pH and TDS Meter Combo: [https://geni.us/ZB8V](https://geni.us/ZB8V)  

General Hydroponics pH Control Kit: [https://geni.us/0N8XhRP](https://geni.us/0N8XhRP)  

Rockwool Grow Cubes: [https://geni.us/bKYaVm](https://geni.us/bKYaVm)  

3000 Pre-Fed Live Ladybugs: [https://geni.us/8u8z](https://geni.us/8u8z) 

Infinite repeat cycle timer plug: [https://geni.us/oAtH](https://geni.us/oAtH) 

VIVOSUN 800GPH Submersible Pump: [https://geni.us/y8krA](https://geni.us/y8krA) 

3/8" ID 1/2" OD Clear Vinyl Tubing-25 Ft: [https://geni.us/VgmElP](https://geni.us/VgmElP) 

5 gallon bucket: [https://geni.us/UIAAhJl](https://geni.us/UIAAhJl) 

OVERTURE PETG Filament: [https://geni.us/g1sC](https://geni.us/g1sC) 

One Month Update:

 

maintenance: