Freshen up your space with this 3D monstera leaf print, sized at 200x200mm and prints with three colors. Included is a 3MF file for those with a Bambu AMS. Simple, stylish, and perfect for plant fans everywhere!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA Overture Grey Green Transmission Distance: 3

PLA BambuLab Matte Ivory White Transmission Distance: 4

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

Swap Instructions:

Start with Charcoal

At layer #12 (1.12mm) swap to Grey Green

At layer #23 (2mm) swap to Ivory White

At layer #32 (2.72mm) swap to Charcoal for the rest. (optional black frame)