This is my version of the Dodecahedral holonomy maze invented by Henry Segerman. You can find his video about it here: 

[https://youtu.be/wzjUTPCAF4Y](https://youtu.be/wzjUTPCAF4Y) 

He also sells the original version of the maze: [https://www.shapeways.com/shops/henryseg?section=Holonomy+mazes](https://www.shapeways.com/shops/henryseg?section=Holonomy+mazes)

Find him also on printables: [https://www.printables.com/@henryseg](https://www.printables.com/@henryseg)

I designed my version in segments that have to be assembled. The pegs are also printed separately.

BOM:

Printed parts:

You need 10 normal segments and 1 left entrance and 1 right entrance. Additionally you need 15 normal pegs. Finally you need the rook. The rook has a hole, in which you could put a M3 headset insert in. So you have a better grip with a screw. 

I printed the partsmostly with a 0.15 mm layer height.

I would recommend you to print one segment first to see, to see if your printer is able to print the corners without support.

Assembly: 

I just started by assembling the segments and adding the pegs afterwards. As a reference, where to place the pegs I looked at Henry Segermans Video and at the 3d model on shapeways. Of course you can also make your own mazes.

Have fun printing and playing.