A very long spoon for mixing stuff.

Print a copy and glue the two parts.

The ready to print stl is:

170mm long (each - 34cm long - aprox. 13,4 inch)

7mm wide (aprox 1/4")

6mm tall

WARNING !!

Be very careful with printed stuff get in touch with FOOD !

Generally printed stuff ARE NOT food safe!

Many plastics like ABS may be toxic and some pigments contains lead and other heavy metals !

Aside that, the micro spaces between layers are great places for bacteria !

Well, you have been warned !

V 0: Upload new design

Print Settings

Rafts:

No

Supports:

Infill:

I used 20%, but you can use 50% to a stronger part

Post-Printing

Print and glue the two parts.

I glued with "Tek Bond 7936" and the parts unglued.

Use a stronger glue or fuse them with temperature or Acetone (ABS) or trichloromethan for PLA

(WARNING! Trichloromethane is neurotoxic and may need a license to buy, there are other options but I do not remember their names)

Category: Hand Tools