Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
You can glue a 10 x 1.5 mm round magnet in the base.
Print instructions
Recommended infill angle: 0°
Low speed and high temperature will create a shiny top surface.
There are "holes" inside the model to make some of the top layers more uniform, and they were created with 0.2 layer height in mind.
If your top surface is not flat & shiny and you see scarring, then make sure to check this guide: [https://bit.ly/2UtN0I1](https://bit.ly/2UtN0I1)
83
Curtidas
500
Downloads
4
Impressões
Categoria
2D Plates & Logos
Tags
superman
batman
flash
dc
green
sinestro
lantern
yellow
corp
wonder
woman
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (1)
flash-logo.stl
126.4 KB