This is an enderman figurine with adjustable arms, rotatable head, and stand with name.

Print Instructions

• Layer Height: 0.2 mm (other layer heights should be fine)
• Filament: PLA (PolyLite PLA and PolyTerra PLA used in photos)
• Colors:
  • Arms and Body Connector: Black
  • Body and Legs: Black
  • Head: Black, then white and purple for the eyes
  • Stand: Beige, then black for text

Included g-code is for Original Prusa i3 MK3S and MK3S+ ONLY. The included 3MF files have all the print settings already configured and can be used for other printers. Color changes are included in the g-code and 3MF files but can be removed if desired.

Assembly

1. Insert body connector into the hole on the bottom of the head. This should require some force and should fit very tightly.
2. Insert the head and body connector into the large hold on the top of the body. There should be close to no gap between the head and the body, and the head should be able to rotate.
3. Insert the arms into the holes on the side of the body. This may require sanding or trimming down the connectors a bit until they fit. There will still be a small gap between the body and the arms after the arms are fully inserted.
4. Insert the legs into the stand. This should also fit pretty tightly.