This clock is modeled to work with the clockwork from an IKEA TROMMA clock (clockwork size 56x56x18mm). If you want to use another clockwork you might have to modify the hands and/or the clockwork plate.

Printing

No supports needed.

Depending on your bed adhesion you might want to use a brim for the body.

Use a color change for the numbers when printing the clock face.

The hands are modeled without any added clearance to ensure a tight fit. If they are too tight, scale them up slightly in the slicer and print again.

Assembly

Glue the clock face and clockwork plate to the ring. Attach the clockwork and the hands. Attach the clock assembly to the body, use glue if needed.