Please give it a 💖 if you like it 🥰

Edit 2024-07-28 :

• Flavor updated

Edit 2024-07-13 :

• Added a “Quality Profile”
• Added the thumbnails to preview models on the printer

👉 Link to my Ender 3 V3 SE Profile

👉 Link to my Ender 3 V3 Profile

👉 My other Slicer Profiles & Models

Please leave a comment if you have any possible improvements to make to these profiles 😉👍

How import profiles?

In PrusaSlicer

Here is the link on how to do it: [https://help.prusa3d.com/article/how-to-import-and-export-custom-profiles-in-prusaslicer_382766](https://help.prusa3d.com/article/how-to-import-and-export-custom-profiles-in-prusaslicer_382766)

In Cura

• 🪧 Don't use the profiles listed in Cura for 'Ender 3 V3 KE" 👉 Create a new printer instead

1 - “Creality Ender 3 V3 KE”

• Set the printer parameters

1 - X (Width): 220

2- Y (Depth): 220

3 - Z (Height) : 250

4 - Start Gcode

M220 S100 ; Reset Feedrate
M221 S100 ; Reset Flowrate
G28 ; Home
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up
G1 X-2.0 Y20 Z0.28 F5000.0 ; Move to start position
M109 S{material_print_temperature_layer_0}
G1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ; Draw the first line
G1 X-1.7 Y145.0 Z0.28 F5000.0 ; Move to side a little
G1 X-1.7 Y20 Z0.28 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 E-1.0000 F1800 ; Retract a bit
G1 Z2.0 F3000 ; Move Z Axis up
G1 E0.0000 F1800

5 - End Gcode

G91 ; Relative positionning
G1 E-2 F2700 ; Retract a bit
G1 E-2 Z0.2 F2400 ; Retract and raise Z
G1 X5 Y5 F3000 ; Wipe out
G1 Z5 ; Raise Z more
G90 ; Absolute positionning

G1 X2 Y218 F3000 ; Present print
M106 S0 ; Turn-off fan
M104 S0 ; Turn-off hotend
M140 S0 ; Turn-off bed
M84 X Y E ; Disable all steppers but Z

1 - Compatible material diameter: 1.75

• Unzip the *-KaminoKGY-Cura.zip file and import the profile file (Manage profiles > Import)

Please give it a 💖 if you like it 🥰