LANTERN

This lantern will give your home a cosy winter feel.
Its simple, uncluttered design is easy to integrate into your décor, making it a discreet way to brighten up your home.

Fully compatible with standard size LED candles.

The dimensions of the print are:
Diameter: 73mm
Total height: 73mm
Base thickness: 3mm
Filling: 15%
Wall thickness: after numerous tests, the ideal wall thickness is 1.5mm, which allows the candlelight to be diffused transparently.

No supports are needed, the holes are small enough to prevent the bridges from sagging. The holes remain oval and allow the light to pass through.
Printing is done directly on the base of the lantern, no assembly required, the object is printed in 1 go.
Created with Fusion360

Filament : Prusa White PLA
Printing: 0.2 mm
Nozzle: 0.4 mm

The print weighs 37 grams and takes just 1 hour 30 minutes to print on a MK4 @0.20 SPEED (with imput shaper).

CANDLE

Do NOT use a real candle!
Use an LED candle - you can buy them very cheaply from IKEA, or any other shop.

I used an LED candle from Philips because it imitates the candle flame in a very pleasant way by lighting up randomly.
Dimensions: H: 45 x Ø 40 mm.
If you don't resize this print, it should fit a standard tea light without any problems.