An Xbox One controller wall mount with an integrated light box. There are two versions for the holder. 1. With an attached headset adapter (this is also suitable for a controller without connected cables). 2. One for a directly connected jack cable. 

The following parts are required:

Wemos D1 Mini (with installed WLED)

• WS2812B LED Stripe (a stripe with 60 LEDs per meter was used here)
• 2 x M3x25
• 2 x M3x10
• 4 anchors/screws

And of course, some minimal soldering skills ;)

Here is the link to the WLED project: [https://kno.wled.ge](https://kno.wled.ge)

As seen in the pictures, I fixed the jumper cables with a bit of hot glue.

Assembly:

1. Install the Wemos D1 Mini and LED Stripe.
2. Connect the USB cable.
3. Attach the base to the wall (4 screws are sufficient).
4. Attach the diffuser to the base and on top of it, the logo, using the two M3x10 screws.
5. Attach the controller holder with the two M3x25 screws.

Have fun!

P.S.:
If anyone is interested in a Playstation version and can contribute an appropriate mount, please let me know! :)