This is a foldable laptop stand, rigid and lightweight, easy to print. This model requires two spare 16mm tubes of any kind, and in my case, I used wound CFRP tubes that I bought online for a reasonable price.

For a 13/14-inch or larger laptop, you will need:

- 2x 16mm OD 20cm L tubes
- 1x 16mm OD 7.5cm L tube

If you purchase a 50cm carbon tube, you'll have plenty of material to make the stand.

Please exercise caution when cutting carbon tubes. Use a Dremel tool and wear gloves, a mask, and goggles because it can be dangerous. Don't worry about imprecise cuts because you can hide your mistakes later!

Pieces should be printed with high infill, at least 30%. Use 100% infill for the bolt.

Any rigid material can be used, such as PLA and PETG. 

Finally you should glue all the parts together with superglue

Enjoy the build and be sure to show me yours!