A set of 3 ‘feet’ for a PCB assembly, used in:

• a Starter Maker PCB that can connect to any of the Raspberry Pi single board computers, a Raspberry Pi Pico, an ESP32, or an ESP8266

• the more extended Raspberry Pi Pico Maker PCB, or 

• the more extended ESP8266 Maker PCB for 3 of its four legs

Plus a single longer legged foot for use as the 4th leg for the ESP8266 Maker PCB.

6mm M2 self-tapping screws are used for attaching the feet to the PCBs. 

Whilst stocks last, a complete kit of components for the Starter Maker PCB, including the 3D printed 'feet', can be purchased here.

More detail on the usage context is available from here, here and here for each of the Maker PCBs, and for the Starter Maker PCB, example software for a wide range of Raspberry Pi and various microcontroller ‘maker’ projects, is downloadable from here.

Printed with 1.75mm PLA on an i3 Mk3 and using: 
- for the 3x shorter feet: 3mm brim; 1.25m of filament; and 42min print time
- for the single longer foot: 8mm brim; 0.61m of filament; and 23min print time