Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Compact snowball maker with a hinge. Easy to print and easy to assemble. It has convenient grips to open the mold.
Printing:
I printed this with PLA, 0,2mm layerheight, 3 perimeters, 15% infil. For printing orientation please refer to 3mf file or the video.
Assemble (also see the video):
- Remove parts from the plate.
- Instert Part_B into Part_A.
- Insert bolt.
- Screw on the nut and tighten gently.
- Have fun.
Fine tuning the hinge:
If you will need to fine tune the bolt clearance, just print the bolt and nut again with use of XY scaling! No need to print the main parts again.
Also check out:
[https://www.cgtrader.com/rorys3d](https://www.cgtrader.com/rorys3d)
1,274
Curtidas
5,456
Downloads
78
Impressões
Categoria
Winter & Christmas & New Year's
Tags
ball
snow
portable
snowball
snowballmaker
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (5)
snowball_maker_compact.3mf
917 KB
part_A.stl
1.3 MB
part_B.stl
1.3 MB
bolt.stl
498.6 KB
nut.stl
467.9 KB