Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Printed each part at .2mm height with 15% infill (except the arm joint at 100%).
I used CA glue to hold all the parts together, there are pins in each for alignment, but glue is still needed. I used a piece of filament for the jaw mount.
The hair is faux fur from a fabric shop held on with hot glue.
42
Curtidas
144
Downloads
2
Impressões
Categoria
Action Figures & Statues
Tags
nutcracker
ballet
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (15)
Gold-NutCrackerCrown.stl
2.6 MB
White-NutCrackerHead.stl
587.6 KB
Red-NutCrackerSuitTop.stl
615.2 KB
Black-NutCrackerBelt.stl
58.7 KB
Red-NutCrackerSuitBottom.stl
433.2 KB
Red-NutCrackerJaw.stl
35.1 KB
Red-NutCrackerArmJoint.stl
127.4 KB
Gold-NutCrackerArmsShoulder.stl
105.3 KB
Red-NutCrackerArmsArm.stl
96.2 KB
Gold-NutCrackerArmsWrist.stl
105.6 KB
White-NutCrackerArmsHand.stl
1.2 MB
Black-NutCrackerThighs.stl
323.8 KB
Gold-NutCrackerKnees.stl
615.3 KB
Black-NutCrackerLegsFeet.stl
384.7 KB
Gold-NutCrackerBase.stl
72.3 KB