Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
How to make
Print model with no supports
I printed the scraper at .24 layer height, 20% infill with 5 walls
Using the scraper
There are two ways to hold the scraper
- Holding the knob with your palm on the brace
- Hold the knob with your thumb on the brace
I have tested it out by scraping the frost off of a windshield and it works great!
Also if you print the version with the threaded knob to use the ridges, you can use the holes on the sides to hold it firmly in your hand
IMPORTANT NOTE
I just uploaded another version with a threaded knob so that you can take it on and off so you can actually use the ridges on the front of the scraper but the normal version is still good for scraping off frost
~ Enjoy!
123
Curtidas
296
Downloads
4
Impressões
Categoria
Automotive
Tags
tool
ice
car
snow
winter
scraper
glass
automotive
cleaner
cold
frost
defrost
icescraper
scrape
scrapertool
scrapers
defrosting
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (6)
Ergonomic Ice Scraper.stl
1.4 MB
Ergonomic Ice Scraper.3mf
662.9 KB
Threaded Ergonomic Ice Scraper Body.stl
1.3 MB
Threaded Ergonomic Ice Scraper Body.3mf
707.5 KB
Threaded Knob.stl
863.2 KB
Threaded Knob.3mf
378.4 KB