Some addons for the Mini ESP32 TV by Megazoid. I already have the popular Simpsons TV and also built the Mini ESP32 TV and started to wonder if I could also make a Mini Simpsons TV.

Its a similar retro style so used the original case files and created the VCR box to glue on top. I used 1.75mm filament as the antennae, maybe a little too thick but you can use whatever you want, the hole is 2mm so glue maybe required to keep it in place.

I also designed a replacement select button. You dont have to use it, the original tact switch will work but if you want to use my remixed select button you will need a 6x6x4.3mm tach switch rather than the 9.5mm. I think a 5mm will also work as there is some wiggle room (you could always sand down the select button base if its a little tight)

I did wonder about some feet but not sure how well they would adhere.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Notes:

Printed in PLA+ but any material should be fine. May need a brim around the select button, I didnt personally.

Category: Electronics