it is a vice good for tinkering and working with it can hold small objects and other stuff.

consists of 2 screws, 2 bases and one clip to lock the long screw. I printed with 50% infill myself, but I also tested with 20% and it was fine, I recommend printing the screws with 0.16mm so that they fit well, and the rest with 0.2mm, you don't need to use supports.

there is a different screw in the photos 1 but it doesn't change anything, the screw in the files is more convenient to use

I don't specify the time because everyone has a different printer and different settings, for me it took about 8 hours.