Port of Zapador's model to Blender.

Its fully automated.

Cutouts: 1 for PLA, 2 for PETG, 3 for TPU and 4 for PA

Usage:

1. Open the downloaded .blend file in blender 3.6 or newer
2. Click “Text” tab and select “Filament chip factory”
3. In the dialog, write the brand of your filament, colour, material and cutout. You can also select if you want the normal 4.5mm chips or thinner 3.3mm chips to save little bit of filament
4. Click “Ok”
5. Everything else is done automatically and .STL file is exported to the directory of the .blend file
6. if you want to create more chips, click File > Revert or press CTRL+Z (sometimes crashes blender)

video guide:

you can get the boxes from the original post (i am not reuploading the unchanged files)