Bin for your gridfinity storage solutions with space for calipers.

You may need to split the model into two parts. I had to split it, and I used PrusaSlicer dovetail-split. If you have a build-volume of more than 250mm, you should be good.

Update:

I added already-split models, so you dont have to tinker with it yourself :)

Also added a version (both split and not) without those magnet-holes if you dont plan on using magnets. In my opinion, they are a little more tricky to print with the magnet holes.

All have 0.2mm tollerance, so if your printer cant handle that fit, you have to cut it yourself with eg. PrusaSlicer's inbuildt cutter

Feel free to ask any questions

Printing tips

I printed mine with 10% (gyroid)infil, 3 bottom layers and 4 toplayers with 2 perimiters