A double card holder meant to be used during play to draw and discard cards. The card holder has two inner areas of 88x58x46.5mm (48-49mm inner height if there's no cap on), the walls are 1mm thick, with a 1mm chamfer at the bottom and top to allow stacking holders.

The cap has a lower and upper chamfer as well, the shape is extruded on the bottom to lock onto the holder (1.5mm).

Also compatible with my other model, the Stackable Card Holder.

Printer Configs:

• 0.20mm Quality
• Generic PLA
• Lightning Filler (15%)
• Three Perimeters, no skirts, no raft
• Organic Support

Print times:

• Both: 6h20m (70.39g)
• No cap: 4h0m (40.64g)
• No holder: 2h20m (29.82g)