Dimensions (LxWxH) 

Outermost diameter of the pumpkins is about 75 mm, and the tallest pumpkin is approx. 100 mm tall. (100% scale)

Basic information

Pumpkins are basically the synonym for Halloween, and the mysterious glow of jack-o'-lanterns is essential for the right spooky atmosphere.

This pumpkin trio brings the Halloween spirit right into your home, and their presence alone will be enough to send chills down the spines of even the bravest of us!

You can choose from 3 styles, each of them is unique, and two of them have a removable lid. The upper opening below the lid is big enough to fit a tealight inside. But for safety reasons, stick exclusively to electric ones!

Oh, and since you're here, you might be interested in a Ghost, to compliment your pumpkins too!

Files information

You can choose from 3 files, all of them in the .stl format. Keep in mind, that S1 requires supports on the mouth!

Material

 PLA

Layer height

0,2 mm

Infill

≥10%

Support

S1 requires supports on the mouth, the other two can be printed without supports. When slicing, make sure the supports aren't hugging the teeth from both sides (inside and outside), as it might be difficult to remove them afterwards.

Scaling

Scaling is definitely possible, feel free to upscale or downscale according to your needs!

Orientation

Default, bottom on the buildplate

Adhesion aid

Not necessary, the contact area should be sufficient.

In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue each specific update was adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not. 

If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.

My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.