Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Heltec Wireless Tracker case for Meshtastic por TonyG no Printables

Descrição

**You can purchase this case and others already printed:**

US customers can purchase from QuantumShadow3D
([https://www.etsy.com/shop/QuantumShadow3D](https://www.etsy.com/shop/QuantumShadow3D))

UK/EU customers can purchase from 3DChicken
([https://www.3dchicken.co.uk](https://www.3dchicken.co.uk))
 

These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.

Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me here to discuss.  Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) and I encourage anyone who sees my designs for sale contact me.

With all that said, now on to the models…
 

Update 13 Apr 2024:

  • Updated nearly all models:
    • Frames and back covers now support battery size of 103665 (similar to MakerFocus 3000mAh lipo pack)
    • Multiple thickness options for back covers

 

This is a case for the Heltec Wireless Tracker v1.0-1.1 boards, designed with the Meshtastic project in mind ([https://meshtastic.org](https://meshtastic.org)).

There are five models required for a complete case, as well as screws & nuts, and a SMA antenna pigtail cable (included with the Heltec board); refer to the parts list below.

Required hardware:

  1. Four (4) M3x20mm socket head cap screws
  2. Four (4) M3 nuts
  3. Battery: 18650 cell (protected cells are highly recommended for safety!) or flat lithium polymer type.  Flat lithium ion battery compartment maximum dimensions: 70mm x 28mm x 16mm (LxWxH).

Optional hardware:

  1. 3-pin on/off two-position panel mount slide switches for GPS and/or power: [https://www.amazon.com/gp/product/B06XFXWLJP](https://www.amazon.com/gp/product/B06XFXWLJP)
  2. Laser-cut acrylic window (see note below)

Minimum required model files:

  1. Heltec-WT_front-<pattern>
    +OR+ Heltec-WT_front-noinsert-<pattern> (if not using a laser-cut acrylic window)
  2. Heltec-WT_back-<pattern>
    +OR+ Heltec-WT_back-18650-<type>
  3. Heltec-WT_frame-noheaders-noSwitch/Heltec-WT-frame-headers-GPSswitch/powerSwitch/powerSwitch-GPSswitch (if using board WITH presoldered header pins) 
  4. Heltec-WT_frame-noheaders-noSwitch/GPSswitch/powerSwitch/powerSwitch-GPSswitch (if using board WITHOUT presoldered header pins)
  5. Heltec-WT_button-<size> (requires two; medium size recommended)

I've also included the SVG file for an optional laser-cut acrylic window using 1mm or 1.5mm acrylic.  If you want one but don't have a laser cutter I sell them on my Etsy store.

Printables

Heltec Wireless Tracker case for Meshtastic

TonyG TonyG (abre em nova aba)

Publicado em 23 de ago de 2024

351
Curtidas
4,934
Downloads
40
Impressões
Categoria Electronics
Tags
esp32 lora meshtastic heltec lora32 heltecesp32 helteclora offgrid
Licença Creative Commons — Attribution — Noncommercial — NoDerivatives
Arquivos (56)
Heltec_WT_v5_front-ribs.stl 294 KB
Heltec_WT_v5_front-no-insert-mLogo.stl 229.5 KB
Heltec_WT_v5_front-hexagons2.stl 255.2 KB
Heltec_WT_v5_front-dots.stl 711.8 KB
Heltec_WT_v5_front-circles.stl 375 KB
Heltec_WT_v5_front-no-insert-hexagons2.stl 246.2 KB
Heltec_WT_v5_front-no-insert-circles.stl 366.2 KB
Heltec_WT_v5_front-hexagons1.stl 286 KB
Heltec_WT_v5_front-mLogo.stl 237.9 KB
Heltec_WT_v5_front-mPwrd.stl 306.6 KB
Heltec_WT_v5_front-no-insert-hexagons1.stl 277.2 KB
Heltec_WT_v5_front-no-insert-dots.stl 702.3 KB
Heltec_WT_v5_front-no-insert-ribs.stl 285.5 KB
Heltec_WT_v5_front-no-insert-mPwrd.stl 298.4 KB
Heltec_WT_v5_front-no-insert-waves.stl 983.8 KB
Heltec_WT_v5_front-waves.stl 991.1 KB
Heltec_WT_v5_front-noscreen-mlogo.stl 200.4 KB
Heltec_WT_v5_front-noscreen-ribs.stl 254.5 KB
Heltec_WT_v5_front-noscreen-hexagons2.stl 220.2 KB
Heltec_WT_v5_front-noscreen-circles.stl 370.8 KB
Heltec_WT_v5_front-noscreen-dots.stl 773.8 KB
Heltec_WT_v5_front-noscreen-hexagons1.stl 256 KB
Heltec_WT_v5_front-noscreen-mPwrd.stl 268.6 KB
Heltec_WT_v5_front-noscreen-waves.stl 1.1 MB
Heltec_WT_v5_button-medium.stl 24.9 KB
Heltec_WT_v5_button-tall.stl 24.9 KB
Heltec_WT_v5_button-short.stl 24.9 KB
Heltec_WT_v15_back-18650-v2-round.stl 784.1 KB
Heltec_WT_v15_back-18650-v2-flat1.stl 775.1 KB
Heltec_WT_v15_back-18650-v2-flat2.stl 805.1 KB
Heltec-WT_v15_back-21700-circles.stl 539.3 KB
Heltec-WT_v15_back-21700-hexagons.stl 306.3 KB
Heltec-WT_v15_back-21700-ribs.stl 280.7 KB
Heltec-WT_v15_back-21700-waves.stl 1.7 MB
Heltec-WT_v15_back-7mm-ribs.stl 198.6 KB
Heltec-WT_v15_back-11mm-mPwrd.stl 262.2 KB
Heltec-WT_v15_back-7mm-hexagons.stl 203.8 KB
Heltec-WT_v15_back-11mm-circles.stl 385.2 KB
Heltec-WT_v15_back-7mm-dots.stl 727.1 KB
Heltec-WT_v15_back-7mm-circles.stl 385.2 KB
Heltec-WT_v15_back-11mm-mLogo.stl 179 KB
Heltec-WT_v15_back-7mm-mPwrd.stl 262.2 KB
Heltec-WT_v15_back-11mm-hexagons.stl 203.8 KB
Heltec-WT_v15_back-11mm-ribs.stl 198.6 KB
Heltec-WT_v15_back-7mm-mLogo.stl 179 KB
Heltec-WT_v15_back-11mm-dots.stl 727.1 KB
Heltec-WT_v15_back-7mm-waves.stl 1 MB
Heltec-WT_v15_back-11mm-waves.stl 1 MB
Heltec_WT_v16_frame-headers-ext-antenna.stl 764.1 KB
Heltec_WT_v16_frame-headers-ext-antenna-powerSwitch.stl 975.2 KB
Heltec_WT_v16_frame-headers-int-antenna.stl 871.3 KB
Heltec_WT_v16_frame-headers-int-antenna-powerSwitch.stl 1.1 MB
Heltec_WT_v16_frame-noheaders-ext-antenna.stl 817.6 KB
Heltec_WT_v16_frame-noheaders-ext-antenna-powerSwitch.stl 1006.7 KB
Heltec_WT_v16_frame-noheaders-int-antenna.stl 926.4 KB
Heltec_WT_v16_frame-noheaders-int-antenna-powerSwitch.stl 1.1 MB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora