Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
The second iteration on an assembly made to be attached at the end of a long pole such that a can of fly or bug spray can be operated at range.
*Tape pictured is no longer required in the V2 due to the new bolt clasp*
Simply attach at the end of a long pole, thread the string around the wheel and spray at a safe distance.
Designed specifically to be used with Raid sprays, although it will fit many cans
Bolts required:
- 6mm Nut and Bolt (at least 30mm)
- 5mm Nut and Bolt (at least 20mm)
- 3mm Nut and Bolt (at least 20mm)
- 3mm Nut and Bolt (at least 20mm)
V2 (no pictures only .STL .GCODE):
- Half push-fit can grip modified to 75% with bolt for proper grip (*no tape needed*)
- Half push-fit can grip was modified specifically to fit RAID spray cans
- Nail hole to hold string-wheel was changed to use a 3mm bolt instead
- String wheel was changed to use a 3mm bolt instead
- Rocker-press arm was changed to use 5mm bolts
Modified design by KDOR on Cults3D
Printables
Bug or fly spray range extender / pole attachment string pull V2
Publicado em 11 de out de 2023
21
Curtidas
100
Downloads
1
Impressões
Categoria
Outdoor & Garden
Tags
can
assembly
diy
garden
roach
home
safety
stick
spray
pole
distance
fly
bug
summer
trap
spraypaint
pestcontrol
rocker
long
wasp
pest
longrange
range
bugspray
extend
cockroach
extention
termite
rattlecan
yellowjacket
flyspray
Licença
Creative Commons — Attribution
Arquivos (5)
thumbnail only.stl
1.7 MB
RaidHolderPlusJoints.stl
265.1 KB
Wheel.stl
273.1 KB
PushRockerArm.stl
60.3 KB
PoleHolder.stl
1.1 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta