Small hypercube, easy to print with supports.

I tried to make a small 1" cube, and it kind of worked (see the 2nd photo), but I wouldn't recommend it.

I usually print this with a raft or a brim since there's not much touching the build plate.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

.3mm

Infill:

Notes:

I used a raft since the supports are thin. Prints well, but takes a long time. 3in (75mm) seems to be a good size, although 2in may work.

Category: Math Art