I cut the wrong 2020 extrusion for my bed on my Hypercube evolution 400x400x400 build.

This works for the MK2S 400x400 3mm heated bed aluminum build plate.

My y axis is approximately 14in / 355mm.

Change the offset parameter in the fusion file for your custom short bracket!

Note: You need a longer screw for the spring bed leveling mount. Also, each bracket requires 3 2020 screws with nuts.

Print in PETG or ABS!

Update 5/20/20:

• Removed the right angle brace as I realised that it is very difficult to use and is not needed structurally.

Category: 3D Printer Parts