AI generated image of a lighthouse processed in HueForge (for background on how to setup your slicer, see this video)

Print Settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Inland Black Transmission Distance: 0.3
PLA Inland Yellow Transmission Distance: 17
PLA Inland Egyptian Blue Transmission Distance: 4
PLA Inland Marble Transmission Distance: 3.7
PLA Hatchbox White Transmission Distance: 3.4

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Yellow
At layer #12 (1.04mm) swap to Egyptian Blue
At layer #13 (1.12mm) swap to Marble
At layer #18 (1.52mm) swap to White for the rest.