Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is an insert I designed for Cryptid. Note that there are different box sizes. This fits the Osprey Games (2018) release.
There are 5 separate player trays, which can be removed and given to players. The sides of the wells are slopped to make it easy to get the discs and cubes out.
A separate tray houses the standing stones, abandoned shacks, the pawn (all recessed so player boards and rulebooks lay flat), as well as the cards. The insert fits sleeved cards (standard only - premium will not fit.
You need to print 1 copy of the Card and Structure Tray and 5 copies of the Player Tray.
Update
I created a second version where all the trays are 2 mm taller. It will use slightly more filament, but in this version, the Card and Structure Tray has a floor for the pawn to sit on if you plan on taking the tray out of the box.
The original version uses slightly less filament but there is a hole where the pawn sits, so it will fall out if you remove the Card and Structure Tray from the box.
Update 2
I created a [OPTIONAL] Card and Structure Tray v2 (1mm wider slots for structures) file by request. However, most people should be able to use the existing Card and Structure Tray v2 without issue.
Dimensions:
| Card and Structure Tray v2 | Card and Structure Tray v2 (1mm wider slots for structures) | |
| Standing Stones | 15.5 mm x 15.5 mm | 16.5 mm x 16.5 mm |
| Abandoned Shacks | 38.5 mm x 24 mm | 40.5 mm x 25 mm |
| Pawn | ⌀ 13 mm | ⌀ 14 mm |
