My church has a bunch of 6 foot Lifetime folding tables to use for events. However, over the years some of the handles have snapped off. This model is a replacement for those handles, and uses the original bolts and nuts to secure them. They are also much stronger and stiffer, so if printed in a good material (I used ASA) they should last a long time!

Onshape link: [https://cad.onshape.com/documents/6e3e1b4a4ed8a73860cc7b9c/w/f6ca3561266d186a372e0c86/e/1c5f822326bf1266f4da0bc0?renderMode=0&uiState=650cf2ad4e75be75ee95e62f](https://cad.onshape.com/documents/6e3e1b4a4ed8a73860cc7b9c/w/f6ca3561266d186a372e0c86/e/1c5f822326bf1266f4da0bc0?renderMode=0&uiState=650cf2ad4e75be75ee95e62f)

Designed to be printed without supports. I used .25mm layer height, 3 walls, and 20% infill.