I wanted to tidy up my desk using a USB hub to hide all of my cables (mouse/keyboard/macropad/streamdeck).  The model is in two parts and friction fits together.

Printed with a 4mm nozzle at 0.2mm layer height and 40% infill.  Your printer will need to be dialled in pretty well as the fit is snug.  I'd suggest using a deburr tool to trim the edges to make the process of clipping together easier.

I've provided two versions of the base as I have also created a Macropad dock [[https://www.printables.com/model/588896/](https://www.printables.com/model/588896/)] that bolts together with this using M5 bolts/nuts.  You only need the version “withScrewholes” if you want to attach a macropad alongside this.

The base is best printed with the large opening to the printbed to save on support material (I didn't orientate it prior to exporting, sorry!).  The holder should be laid flat on the printbed as well.

If you have any issues or questions then feel free to DM/comment and I'll do my best to help.  I'm also on twitter with the same handle as Printables.