***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Pro Metallic Bronze Transmission Distance: 1
PLA PolyTerra Muted Red Transmission Distance: 1
PLA PolyLite Pro Pink Transmission Distance: 3
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #26 (2.16mm) swap to Charcoal Black
At layer #43 (3.52mm) swap to Metallic Bronze
At layer #45 (3.68mm) swap to Muted Red
At layer #48 (3.92mm) swap to Pink
At layer #50 (4.08mm) swap to Savannah Yellow
At layer #54 (4.4mm) swap to White for the rest.