Save yourself $100 for a new toolset by replacing the broken latches. 

Printed in both PLA and PETG. Has worked well for two years in a garage. 

Both pieces snap into place well for my 220 piece set (#36220). Same latches are used on many Craftsman tool sets including the 115 piece (#13161), 165 piece (#38165) and the 230 piece (#50230, #70190, #99920). 

Part 1 was printed horizontally and part 2 was printed on its side (as shown on Prusa). Both were printed with supports.

Public CAD files are here if you'd like to adjust the fit or make a remix.  A print in place latch would be a nice improvement :)

[https://cad.onshape.com/documents/44f09770c2c32ebc01e98634/w/d2d36041493bef26bc50da5a/e/db0e09fba325635fc7c30121](https://cad.onshape.com/documents/44f09770c2c32ebc01e98634/w/d2d36041493bef26bc50da5a/e/db0e09fba325635fc7c30121)

[https://cad.onshape.com/documents/ead2720ba9fb28306285d974/w/679a6b7163cd9b2dcfc26abe/e/d8b98f6a0a15dd76dd48083a](https://cad.onshape.com/documents/ead2720ba9fb28306285d974/w/679a6b7163cd9b2dcfc26abe/e/d8b98f6a0a15dd76dd48083a)