Leupold scope throw lever

scope throw lever for Leupold Rifleman 3-9x40 designed to fit over a 36.2mm adjuster.

I used a M3x8mm bolt, but you could probably use a 5mm

I added two M3 washers in the gap to prevent over tightening the ring

two edges would not take a fillet in Fusion 360.

This is my first item successfully designed and printed

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Supports:

Yes

Resolution:

0.16

Infill:

25%

Filament: eSun PLA + red

Notes:

Print flat on bed

I used tree supports, probably not necessary

Category: Sport & Outdoors