Print it on its back and you only need supports for the bracket for two of the tree models.

Printer settings are the settings as used in the entire The100 project (see git of the project)

Use same heat inserts as the entire project attach the plug. (see BOM the100)

There are tree stl files:

• one that does not require any support. The socket sticks out
• one where the socket does not stick over the power supply, requires support for the bracket
• one where the front of the socket is in line with the back frame. Also needs support for the bracket.

The socket I used [https://nl.aliexpress.com/item/4000829552351.html](https://nl.aliexpress.com/item/4000829552351.html) I am sure you can find similar sockets on Amazon 

Inspired on [https://www.printables.com/model/449442-plug-box-for-the-100](https://www.printables.com/model/449442-plug-box-for-the-100) by @idconvict_610964

The printer: [https://www.printables.com/model/430339-the-100-the-fastest-3d-printer-based-on-a-printed-](https://www.printables.com/model/430339-the-100-the-fastest-3d-printer-based-on-a-printed-) great designed by @MattThePrinti_703024