This time my wife wanted the original kitchen clock for morning coffee.
An hour of work with Fusion 360 and the project is ready.

BTW. It's slowly time to move out from Thingiverse. This website working sooo slow and have many issues. Too many for me.

Print instructions

This time my wife wanted the original kitchen clock for morning coffee.
An hour of work with Fusion 360 and the project is ready.

BTW. It's slowly time to move out from Thingiverse. This website working sooo slow and have many issues. Too many for me.

Print Settings

Printer Brand: Anycubic Kossel
Rafts: No
Supports: No
Resolution: 0.2mm, 60mm/s
Infill: 100%
Filament: PLA

Notes:
The face has a marked centre for drilling on the underside. Thanks to this, a relatively uniform layer are created during printing.
Remember to print with 100% infill.

The element heights are designed so that you can print different colours for numbers and characters.
You can use any standard battery mechanism available on [https://www.amazon.com?linkCode=ll2&tag=tvad0304-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl](https://www.amazon.com?linkCode=ll2&tag=tvad0304-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl)
[https://www.amazon.com?linkCode=ll2&tag=tvad0304-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl](https://www.amazon.com?linkCode=ll2&tag=tvad0304-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl) or Ebay.

I attached decorative elements to the wall with double-sided adhesive tape.