Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A modular desk organizer. Parts can be stacked both horizontally or vertically (as in the picture). To join two blocks, use the joints with the corresponding height. In each filename, you can find information such as: the height of the part (in mm), the diameter for the pen holes (in the pen_holder parts), or the type of holder (in the sd_microsd_multi parts).
Most of the parts could be printable without supports (e.g. the joints could be printed without supports horizontally).
I've also added the fusion360 and step file if you want to customize your parts.
Enjoy!
Luca
1,344
Curtidas
3,686
Downloads
11
Impressões
Categoria
Office
Tags
organizer
office
desk
modular
deskorganizer
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (49)
s100.stl
4.6 KB
s75.stl
4.6 KB
s50.stl
4.6 KB
s25.stl
4.6 KB
u100.stl
16.3 KB
u75.stl
13.2 KB
u50.stl
10 KB
u25.stl
6.9 KB
usb_horizontal.stl
19.6 KB
usb_microsd.stl
21.2 KB
sd_microsd.stl
24.7 KB
usb_sd.stl
21.2 KB
multi.stl
23.5 KB
phalf_diam15.stl
59.9 KB
p_diam16.stl
187.6 KB
phalf_diam11.stl
160.1 KB
p_diam12_5.stl
309.8 KB
jh100.stl
684 B
jh75.stl
684 B
jh50.stl
684 B
jh25.stl
684 B
jh12_5.stl
684 B
j100.stl
1.1 KB
j75.stl
1.1 KB
j50.stl
1.1 KB
j25.stl
1.1 KB
j12_5.stl
1.1 KB
chest100.stl
6.9 KB
chest68.stl
5.4 KB
chest36.stl
3.8 KB
drawer.stl
144.9 KB
h100.stl
3.8 KB
h75.stl
3.8 KB
h50.stl
3.8 KB
h25.stl
3.8 KB
b100.stl
4.6 KB
b75.stl
4.6 KB
b50.stl
4.6 KB
b25.stl
4.6 KB
ha100.stl
10.7 KB
ha75.stl
11 KB
ha50.stl
11.9 KB
ha25.stl
12.7 KB
a100.stl
11.4 KB
a75.stl
11.6 KB
a50.stl
12.2 KB
a25.stl
12.4 KB
all_parts.f3d
592.2 KB
all_parts.step
2.9 MB