Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Stronghero 3D Wizard Voodoo Purple/Blue Transmission Distance: 4
PLA PolyLite Magenta Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.36mm) swap to Purple/Blue
At layer #10 (0.52mm) swap to Magenta
At layer #14 (0.68mm) swap to White for the rest.