Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm with a .2mm nozzle for best results. for .4mm nozzle try a layer height of 0.06mm with a base layer of 0.14mm.
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Stronghero 3D Wizard Voodoo Purple/Blue Transmission Distance: 4
PLA PolyLite Magenta Transmission Distance: 1
PLA PolyLite Lime Green Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Purple/Blue
At layer #8 (0.72mm) swap to Magenta
At layer #10 (0.88mm) swap to Lime Green
At layer #14 (1.2mm) swap to White for the rest.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta