This remix of Zack Freedman’s Hextraction Clone Tile & Card was done primarily to remove the built-in sacrificial support as most printers should be able to bridge this distance without the need for supports. See the changelog below for additional changes.

Learn more about the free 3D-printed board game Hextraction here.

Print Settings

This tile & card should be properly oriented & are designed to be printed without supports. For best results, print using a 0.2mm layer height. I used 40% infill, but you can experiment with other infill densities if you’d like.

To print the tile & card with 2 filament colors as I have, using a 0.2mm layer height, these are the filament swaps needed:

Clone Tile
Layer 1-65: green
Layer 66-126: gray

Clone Tile Card
Layer 1-10: green
Layer 11-25: gray

Value4Value

This remix is being released under the Value4Value model. If you received any value from my work, please determine what it was worth to you & return that value to me in the form of a donation. Thank you for supporting my work!

Print Info

Printer: VORON 2.4 350
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 40%
Filament: Keene Village Plastics - Green Lemon-Lime & Dark Gray PLA

Changelog

Changes made to the original design:
• Clone Tile — removed built-in sacrificial support, adjusted arrow geometry for symmetry
• Clone Tile Card — adjusted arrow geometry for symmetry, remodeled upper portion of ramp for improved printed appearance, added period at end of rules text for continuity

“If I have seen further, it is by standing on the shoulders of Giants.” — Isaac Newton

This tile & card was remixed from the original Hextraction Clone Tile by Zack Freedman using Fusion 360.