Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.

Print instructions

Category: Containers Summary

Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.

Print Settings

Rafts:

Doesn't Matter

Supports:

Notes:

Print with window down to embed a mesh, or as-is if you plan to add the mesh after (with tape, or ironing, ...)

If print as-is you may use supports depending of your printer's bridging capability.