Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a mix of the original pulley and the PC-Blend Prusa Pulley. The wheel over the bold assures that the bolt and the wheel are not connected and cause friction. The wheel is also wider than the wheel so that is gets stuck in the pulley body.
- Use M5 x 25 bolts
- Print with 6 perimeter walls
- 20% Gyroid infill
- Preferably in PC blend or PLA CF
35
Curtidas
307
Downloads
3
Impressões
Categoria
Other House Equipment
Tags
cable
pulley
pully
katrol
cablepully
cablepulley
cordpulley
cordpully
Licença
Creative Commons — Attribution
Arquivos (3)
Pulley Pin 6.stl
56.3 KB
Pulley Wheel 2.stl
632.9 KB
Pulley Body.stl
788.8 KB