Desk organiser with 3 different module sizes and (optional) embedded magnets to snap them together for more stability.
Several modules can be printed to make an even bigger system that can snap together in line or rectangle configurations.

Magnets: designed for round or rectangular magnets, 10x2mm.
The magnets are embedded during the print. Provided .gcode file and the project file pause for this step during the printing. Magnet orientation is important in order to be able to join the modules in any configuration. One of the images shows the recommended orientation for polarities for each slot.

Pausing during the print can be used to experiment with different filament color combinations.

Print instructions

If you use the provided .gode or project file, there are print pauses to change the filament color and also add the magnets (make sure to orientate the magnets front and right in each slot). These are all optional of course.

The model was designed so that no supports are needed.