Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
expandable SD card storage for SD, Mini and Micro.
This model is compatible with my Nozzle Storage as well "Nozzle Storage - Multiple Layer - V6".
The Premade G-Code is at set matching the pictures.
Print instructions
Models
There are 3 model types, Bottom, Layer and Top.
The Bottom and Layer models come in 4 different types each fitting a specific SD Card size. To make a SD Storage unit you only need 1 Bottom and you can make for any SD card size you wish. The Layer models you can print as many as you want depending on how many SD card you need to store, and you can always add a new layer to your unit.
The Top you also only need 1 of, and there are 3 to choose between, Smooth, Text and Figure depending on how you would like the unit to look.
Printing
If you use the standard setting for PLA on a PRUSA printer, all the models can be printed without support, however you might want to use support if you print in PETG.
I recommend layer height at 0.20 or smaller as this will make the thread nice and smooth.
That is all you need to know, good luck.
Happy Printing! and don't forget to upload a picture of your result!
SD Storage - Multiple Layer - SD, Mini & Micro
Publicado em 1 de fev de 2021