Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Super simple shelf support pin/peg for wardrobes, bookshelves, etc. that use pre-drilled holes and pegs to hold up flat board shelving.
Prints with no supports. Consider adding brim.
You may need to do a test print to size my STL file up or down a little if the peg is too loose or tight, respectively.
NOTE: This is an asymmetric pin, designed to be printed with the largest flat side touching the build plate.
14
Curtidas
55
Downloads
Categoria
Other House Equipment
Tags
shelf
pin
replacement
peg
pegboard
thingiverse
replacementpart
replacementparts
shelfsupport
shelfpin
shelfpeg
bookshelfpin
Licença
Creative Commons — Attribution
Arquivos (1)
shelf_peg_v1.stl
23.9 KB