I love this model by Printed obsession  and wanted to make it larger, so I did. I have also completely redone the supports with Prusaslicer paint on supports to have as few as possible (this took a while and two failed prints to get just right. There is an extra little custom structure to support the front leg ‘stump’ to ensure the supports don't fail there*. It can be removed with the rest of the supports.

I have included 3MF* and STL files for both a 0.6 & 0.4 nozzle print.

Simply print the model, carefully remove supports, lightly sand the surfaces on the end of the stump and the end of the leg that  will be glued together and….glue together.

*If you reslice this with the 3MF files I've included, You may get a “Conflicts in G-code paths have been detected at layer 0…”. That specific error message can be ignored. It appears because the extra little custom structure I've added melds with the supports. As they all get removed, this conflict does not matter.

Please hit the like ♥ and post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D

Please consider joining my Printables Club and follow me on:
Printables.com
www.facebook.com/profile.php?id=100082036420297
Twitter: @Ozzy_The_Artist

Thanks :o )